In this screen you can choose between several tools to configure your boot steps. Click on a link below to learn more.
This tool[47] allows you to automatically login the same user, in her/his desktop environment, without asking for any password. It's called autologin. This is generally a good idea when there is only one user like to be using the machine.
"자동 로그인을 위한 자동 로그인 설정"이라는 레이블이 붙은 Mageia 제어 센터의 부팅 탭 아래에 있습니다.
인터페이스 버튼은 매우 명확합니다:
Check , if you want X Window System to be executed after the boot. If not, the system will start in text mode. Nevertheless, it will be possible to launch the graphic interface manually. This can be done by launching the command 'startx' or 'systemctl start dm'.
If the first box is checked, two other options are available, check either , if you want the system to continue to ask for which user to connect (and password) or check , if needed. In this case, you also need to supply the Default username and the Default desktop.
If you are using a UEFI system instead of BIOS, the user interface is slightly different as the boot device is obviously the EFI system Partition (ESP).
This tool[48] allows you to configure the boot options (choice of the bootloader, set a password, the default boot, etc.)
"부팅 시스템 설정"이라는 레이블이 붙은 Mageia 제어 센터의 부트 탭 아래에 있습니다.
주의
정확히 무엇을 하고 있는지 모르는 경우 이 도구를 사용하지 마십시오. 일부 설정을 변경하면 컴퓨터가 다시 부팅되지 않을 수 있습니다!
In the first part, called Bootloader, it is possible if using BIOS, to choose which , Grub, Grub2 or Lilo, and with a graphical or a text menu. It is just a question of taste, there are no other consequences. You can also set the , don't change anything here unless you are an expert. The boot device is where the bootloader is installed and any modification can prevent your machine from booting.
In a UEFI system, the bootloader is Grub2-efi and is installed in /boot/EFI partition. This FAT32 formatted partition is common to all operating systems installed.
In the second part, called Main options, you can set the , in seconds. During this delay, Grub or Lilo will display the list of available operating systems, prompting you to make your choice. If no selection is made, the bootloader will boot the default one once the delay elapses.
In the third and last part, called , it is possible to set a password for the bootloader. This means a username and password will be asked at the boot time to select a booting entry or change settings. The username is "root" and the password is the one chosen here.
버튼은 몇 가지 추가 옵션을 제공합니다.
ACPI (Advanced Configuration and Power Interface) is a standard for the power management. It can save energy by stopping unused devices, this was the method used before APM. Check this box if your hardware is ACPI compatible.
SMP는 Symmetric Multi Processors의 약자로 멀티코어 프로세서를 위한 아키텍처입니다.
참고
HyperThreading이 있는 프로세서가 있는 경우 Mageia는 이를 이중 프로세서로 보고 SMP를 활성화합니다.
및
APIC stands for Advanced Programmable Interrupt Controller. There are two components in the Intel APIC system, the local APIC (LAPIC) and the I/O APIC. The latter one routes the interrupts it receives from peripheral buses to one or more local APICs that are in the processor. It is really useful for multi-processor systems. Some computers have problems with the APIC system which can cause freezes or incorrect device detection (error message "spurious 8259A interrupt: IRQ7"). In this case, disable APIC and/or Local APIC.
화면은 선택한 부트로더에 따라 다릅니다.
Grub Legacy 또는 Lilo가 있습니다:
In this case, you can see the list of all the available entries at boot time. The default one is asterisked. To change the order of the menu entries, click on the up or down arrows to move the selected item. If you click on the or buttons, a new window appears to add a new entry in the bootloader menu or to modify an existing one. You need to be familiar with Lilo or Grub to be able to use these tools.
레이블 필드는 자유 형식이므로 메뉴에 표시할 내용을 여기에 작성하십시오. Grub 명령 "제목"과 일치합니다. 예: Mageia3.
이미지 필드에는 커널 이름이 포함됩니다. Grub 명령 "커널"과 일치합니다. 예: /boot/vmlinuz.
루트 필드에는 커널이 저장된 장치 이름이 포함됩니다. Grub 명령 "루트"와 일치합니다. 예를 들어 (hd0,1).
Append 필드에는 부팅 시 커널에 제공될 옵션이 포함됩니다.
기본값 상자를 선택하면 Grub은 기본적으로 이 항목을 부팅합니다.
In the extra screen called Advanced, it is possible to choose the Video mode, an initrd file and a network profile, see the section called “다른 네트워크 프로파일 관리”, in the drop-down lists.
Grub2 또는 Grub2-efi(레거시 모드 및 UEFI 모드에서 각각 기본적으로 사용되는 부트 로더)가 있습니다.
이 경우 기본값이라는 드롭다운 목록에 사용 가능한 모든 항목이 표시됩니다; 기본으로 원하는 것을 클릭하십시오.
Append 필드에는 부팅 시 커널에 제공될 옵션이 포함됩니다.
If you have other operating systems installed, Mageia attempts to add them to your Mageia boot menu. If you don't want this behaviour, uncheck the box Probe Foreign OS
In the extra screen called Advanced, it is possible to choose the Video mode. If you don't want a bootable Mageia, but to chain load it from another OS, check the box Do not touch ESP or MBR and accept the warning.
주의
ESP 또는 MBR에 설치하지 않는다는 것은 다른 OS에서 체인을 로드하지 않는 한 설치를 부팅할 수 없음을 의미합니다.
다른 많은 매개변수를 설정하려면 Mageia 리포지토리에서 사용할 수 있는 Grub Customizer라는 도구를 사용할 수 있습니다(아래 참조).
Here[49] you can choose which display manager to use to log into your desktop environment. Only the ones available on your system will be shown.
Most users will only notice that the provided login screens look different. However, there are differences in supported features, too. LXDM is a lightweight display manager, SDDM and GDM have more extras.
